SR-EX100 Series

PART NUMBER
SR‑EX100-	___-	___-	___-	___


Model No.	LED or Lamp Base	Watts	CCT (If Applicable)	Finish

SR-EX100	L LED	10	30K	BL Matte Black
		20	35K	BZ Bronze
		35	40K

**(Consult Factory for more options)

DIMENSIONS

BASE MODEL NO.	H	DIA	W	D	MC
SR-EX100-L10	9″	3″	4 1/4″	5 1/4″	4 1/2″
SR-EX100-L20	11″	4″	4 1/4″	6 5/8″	5 1/2″
SR-EX100-L35	13″	5 3/4″	5 3/4″	8 3/8″	6 1/2″

SPECIFICATIONS

Dimming: 0-10V Dimming, 120/277/(Consult factory for 347V)
Mounting: Mounts to all Standard Electrical Junction Boxes (by others) With Hardware Provided. Silicone Seal Required (By Others).

FEATURES

• Fixtures will be shipped with specified settings and beam spreads
• For any variation from standard, please contact factory
• See below for special features
• UL Listed for Wet Location
• ELV Dimming

APPLICATIONS

• Building Exterior
• Entry Way

SPECIAL FEATURES (these features come on all models)

3 Color Temperatures
On board switch allows for on-site adjustment to 3000/3500K/4000K options.

Note: For factory Pre-set, please indicate the CCT
in the part number (ex: SR-EX-100-L10-35K-BL)

3 Light Levels
On Board Switch allows for on-site adjustment to 3 light levels.

10W/8W/6W
20W/16W/12W
35W/29W/22W

Note: For Factory Pre-Set Watts, please indicate the Wattage
in the part number (ex: SR-EX-100-L06-30K-BZ)

Photosensor
On Board Sensor and Switch allows an internal photocell to be turned on or off as needed.

NOTE: For Factory Pre-Set to ON, please indicate
in the part number (ex: SR-EX-100-L10-40K-BL-PS)

Up/Down
On Board Switch allows for on-site setting of Combined up and downlight,
Uplight Only or Downlight Only options.

Up/Down – (Blank – standard)
Uplight Only – (UO)
Downlight Only – (DO)

NOTE: For Factory Pre-Set, please indicate the position
in the part number (ex: SR-EX-100-L10-40K-BL-PS-UO)